Starlink RJ45 + Anderson Plug Surface Mount
Starlink RJ45 + Anderson Plug Surface Mount
In stock
Couldn't load pickup availability
Quick facts
- Fits
- The supplied RJ45 passthrough plus the selected Anderson SB50, SB120, SB175 or SB350 connector.
- Included
- Mount, RJ45 passthrough connector, flexible TPU gasket and M5 countersunk stainless mounting hardware.
- Plugs included?
- The RJ45 passthrough is included. Anderson plugs, network cables and dust covers are sold separately. Shop Anderson plugs
Selected dimensions
Complete the connector options above to see the exact mount dimensions.
Selected setup:
- Width
- —
- Length
- —
- Height
- —
Installation and gasket template
- Installation time
- Approximately 20–30 minutes.
- Difficulty
- Basic to intermediate DIY; drilling and rear-panel access are required.
- Required access holes
- Use the gasket to mark each cable or connector entry position. Drill separate access holes sized only for the cables or connector bodies; do not remove the entire inner opening.
- Marking template
- No download is required. Use the supplied gasket as the full-size template for the individual access holes and M5 mounting-hole centres.
Disconnect power, check both sides of the panel, confirm cable bend clearance and deburr every drilled edge before assembly.
Dispatch, shipping and returns
- Dispatch Orders are dispatched within 1–3 business days, excluding weekends and public holidays.
- Made to order Mounts are made to order. “In stock” means materials are available and manufacturing starts after you order.
- Free standard shipping Australia-wide on orders over A$59. The offer applies to standard Australia Post delivery only; orders under A$59 are calculated at checkout.
- Australia Post Parcel Post typically takes 2–6 business days after dispatch. Times vary by destination.
- 30-day returns Change-of-mind returns are accepted within 30 days, subject to the returns policy. Australian Consumer Law rights continue to apply.
Starlink RJ45 + Anderson Plug Surface Mount
A clean, secure way to mount one RJ45 Starlink connection alongside one selected Anderson power connector—including 3 Pole SB50, SB50, SB120, SB175 or SB350—on your canopy, tray, toolbox, caravan, camper trailer or 4WD.
Supplied with an RJ45 passthrough connector, this double mount keeps your Starlink network and 12V power connections neat, protected and easy to access instead of leaving loose connectors hanging inside your setup.
Ideal for Starlink installations in touring canopies, caravans, camper trailers, motorhomes and off-grid communications setups.
Custom Labels
Optional front labels can be added to identify each connection.
Labels are entered from left to right as viewed from the front of the mount.
What's Included
- 1x Starlink RJ45 + Anderson Plug Surface Mount
- 1x RJ45 passthrough connector
- 1x Flexible TPU mounting gasket
- M5 countersunk stainless mounting hardware
Note: Anderson plug, network cables and dust covers are sold separately.
Made in Australia
Designed and made in Australia by AFS Offroad from ASA-GF, a strong UV-resistant material suited to outdoor use.
The included Flexible TPU mounting gasket is selected for flexibility, heat resistance, UV resistance and outdoor 4WD/canopy installs.
What Anderson Plug Do I Need?
Choose the mount size to match the Anderson plug you are using. If you already have a plug fitted, match the size printed on the plug housing. The 3 Pole SB50 is a three-contact DCDC-style connector and is not interchangeable with a standard two-pole SB50.
| Plug size | Typical use |
|---|---|
| 3 Pole SB50 | DCDC charger and three-pole auxiliary power connections |
| SB50 | Fridge power, solar input, accessory power and lighter 12V circuits |
| SB120 | Battery charging, heavier canopy power and DCDC wiring where suitable |
| SB175 | Battery, inverter, trailer or higher-current auxiliary connections |
| SB350 | Very high-current charging, starting or equipment power setups |
If unsure, match the mount to your existing Anderson plug size, cable size and expected current draw.
Starlink Compatibility
The mount is supplied with one panel-mount RJ45 passthrough connector for a neat Starlink network connection.
Check your cable arrangement before installation. Starlink hardware and cable configurations can vary between generations.
Key Features
- Includes one RJ45 passthrough connector
- Suits 3 Pole SB50, SB50, SB120, SB175 or SB350 Anderson-style plugs
- Extra cable clearance behind both connectors
- Optional front labels to identify each connection
- Clean rounded shape for a neat finished look
Installation
The countersunk mounting holes allow the mount to clamp down evenly over the gasket. Snug the screws down; no need to overtighten.
View the Surface Mount Installation Guide.
Backed by our 30-day change-of-mind returns, plus full cover for any fault under Australian Consumer Law.
Important: water protection and electrical installation
Not waterproof: Dust covers, mounting gaskets and connector mounts do not create a waterproof or watertight seal. Install them in a protected location away from direct spray, high-pressure water and immersion.
Qualified installation required: All electrical wiring and installation must be carried out by a suitably qualified electrician or auto electrician, as appropriate. The installer must select correctly rated cable, terminals, fusing and circuit protection for the application.
Don't have what you are looking for?
Build a surface mount to suit your setup. Mix and match Anderson Plugs and Deutsch DT connectors to create a clean, secure mounting solution for your 4WD, caravan, trailer or canopy. Made in Australia from durable ASA-GF.
Anderson Plugs
-
SB50 Genuine Anderson Plug Kit - Grey
Regular price $9.95 AUDRegular price -
SB50 Genuine Anderson Plug Kit - Red
Regular price $9.95 AUDRegular price -
SB50 Genuine Anderson Plug Kit - Blue
Regular price $9.95 AUDRegular price -
SB120 Genuine Anderson Plug Kit - Grey
Regular price $24.95 AUDRegular price -
SB175 Genuine Anderson Plug Kit - Grey
Regular price $34.95 AUDRegular price -
SB350 Genuine Anderson Plug Kit - Grey
Regular price $59.95 AUDRegular price
Complete your installation
-
Single Anderson Plug Surface Mount
Regular price $29.95 AUDRegular price -
Double Anderson Plug Surface Mount
Regular price $39.95 AUDRegular price -
Triple Anderson Plug Surface Mount
Regular price $49.95 AUDRegular price -
3 Pole Anderson Plug Surface Mount (DCDC)
Regular price From $29.95 AUDRegular price
